UHM-TS-A1.5L
1.5 Litre tank melter rated at 2 kg/hour. Bench unit, max air pressure 5 kg/cm².
Actual unit photograph — 1.5 Litre tank
Tank Systems
1.5 Litre tank melter
UHM-TS-A1.5L is a 1.5 litre hot melt unit rated at 2 kg/hour, drawing 1,100 W from a 220 V AC, 6 A, 50 Hz, 1ø supply and running to a maximum of 220°C. Bench unit, max air pressure 5 kg/cm².
- Tank capacity
- 1.5 Litre
- Melt rate
- 2 kg/hour
- Tank power
- 1,100 W
- Power supply
- 220 V AC, 6 A, 50 Hz, 1ø
- Max operating temperature
- 220°C
We size the unit against your grams per carton and cartons per minute, and quote the adhesive grade with it. Installation and operator training included.
What you get
- Bench unit, max air pressure 5 kg/cm²
- Manufactured at our own works in India
- Gun, hose and nozzle supplied as a matched set
- Tank size chosen from your actual consumption, not from a catalogue page
- Spares held for every model we build
- Available on short-term or long-term contract
Specified with it
- Applicator guns — manual or automatic, matched to the pattern
- Heated hoses — made to your line layout length
- Nozzles & modules — bead, dot, spiral spray or slot
- Spare parts — heaters, thermocouples, filters, seals
Technical specification
UHM-TS-A1.5L data
| Tank capacity | 1.5 Litre |
|---|---|
| Melt rate | 2 kg/hour |
| Tank power | 1,100 W |
| Power supply | 220 V AC, 6 A, 50 Hz, 1ø |
| Max operating temperature | 220°C |
| Equipment line | Tank Systems |
| Configuration | Bench unit, max air pressure 5 kg/cm² |
| Heating | Thermocouple controlled tank, hose and gun |
| Supplied with | Matched gun, heated hose and nozzle set |
| Spares | Held in stock for every model we build |
Typical values. Tank, hose set and nozzle are configured against your line, so the final specification is confirmed on the quotation.
Ask for a demonstration of the UHM-TS-A1.5L
Send us the carton, the bead pattern and the line speed. We run the trial with the adhesive it will use.